Forward And Direct Clutch Inspection - Suzuki 2006 SX4 Service Manual

Hide thumbs Also See for 2006 SX4:

Table of Contents

5A-110 Automatic Transmission/Transaxle:

Forward and Direct Clutch Inspection

1) Check that sliding surfaces of friction, separator and

retaining plates are not worn or burnt. If necessary,

• If friction plate lining is exfoliated,

discolored or worn hardly, replace all

friction plates.

• Before assembling new friction plates,

soak them in A/T fluid for at least two

2) Measure height of direct clutch piston return spring.

Forward clutch return spring height

Standard: 23.59 mm (0.93 in.)

Do not apply excessive force when

measuring spring height. Perform

measurement at several points.

3) Check that ball makes creaking noise when shaking

S6RW0C5106043

forward clutch piston and direct clutch piston. (i.e.,

check that ball is free.)

4) Check that there is no leakage from backside of oil

hole (1) by applying low pressure air.

I2RH01510147-01

I2RH01510148-01

I2RH01510149-01

Table of Contents