Connecting And Enabling A Usb Modem (G350 Without S8300) - Avaya G350 Installing And Upgrading

21. Disconnect the flat cable from the COM port of the laptop computer.
22. Connect the flat cable to the DB-25 connector on the modem.

Connecting and enabling a USB modem (G350 without S8300)

You can enable a USB modem on the USB port on the G350 front panel. See
supported by the G350
Note:
No configuration is necessary for Services personnel to remotely access the
Note:
gateway through a USB modem.
1. Prepare a PC with a CD-ROM drive and a TFTP server on the network. This may be
needed for installing software and firmware upgrades.
Note:
When uploading firmware from the S8300 using TFTP, you may need to enable
Note:
TFTP service in the Set LAN Security parameters of your web server.
Note:
Firmware upgrades for the G350 and media modules can either be installed from
Note:
CD or downloaded from the Web.
2. Download GIW (Gateway Installation Wizard) from the Avaya Support website
(support.avaya.com/avaygiw) to the laptop computer. The laptop should be running
Windows 2000, Windows 2003 server, or Windows XP to support GIW.
3. Plug one end of the provided flat RJ-45 to RJ-45 cable into the provided DB-9 adapter.
4. Plug the RJ-45 connector at the other end of the cable into the Console port of the G350.
5. Plug the DB-9 end of the flat cable into the COM port of the laptop computer.
6. From your laptop computer, double-click the GIW icon to run GIW. The Overview screen
appears.
7. Click Continue. The Gateway Connection Details screen appears.
8. Choose Select if this is any Gateway other than G430.
9. Click Continue. The G350 Wizard Usage Options screen appears.
10. Select Enable the modem for remote installation.
11. Click Continue. The G350 Modem Type Selection screen appears.
12. Select USB Modem.
13. Click Continue. The G350 USB Modem Configuration screen appears.
Connecting and enabling a modem (G350 without S8300)
on page 136 for a list of the USB modems supported by the G350
USB modems
Issue 7 November 2009 63