Show Ip Pim Neighbor - Dell Force10 Z9000 Reference Manual

172.21.110.1
172.21.203.1

show ip pim neighbor

View PIM neighbors.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax show ip pim neighbor
Command Modes
Command History
Version 8.3.11.1
Version 8.3.12.0
Version 8.1.1.0
Version 7.8.1.0
Usage The following describes the show ip pim neighbor command shown in the Example
Information
below.
Field
Neighbor address
Interface
Uptime/expires
Ver
DR prio/Mode
Example
FTOS#show ip pim neighbor
Neighbor
Address
Gi 13/6
Gi 13/7
• EXEC
• EXEC Privilege
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Description
Displays the IP address of the PIM neighbor.
List the interface type, with either slot/port information or ID (VLAN
or Port Channel), on which the PIM neighbor was found.
Displays the amount of time the neighbor has been up followed by
the amount of time until the neighbor is removed from the multicast
routing table (that is, until the neighbor hold time expires).
Displays the PIM version number.
•
Displays the Designated Router priority and the mode.
•
•
•
Interface
v2/S 0 30 1
v2/S 0 30 1
v2 = PIM version 2
1 = default Designated Router priority (use the ip pim
dr-priority command)
DR = Designated Router
S = Sparse mode
Uptime/Expires
172.21.110.1
172.21.203.1
Ver DR
Prio/Mode
1141