Show Ip Pim Snooping Neighbor - Dell S4810 Reference Manual

Usage The following describes the show ip pim snooping interface commands
Information
shown in the following example.
Field
Interface
Ver/Mode
Nbr Count
DR Prio
DR
Example (#2)
Dell#show ip pim snooping interface
Interface Ver Nbr
Vlan 2

show ip pim snooping neighbor

Display information on PIM neighbors learned through PIM-SM snooping.
S4810
Syntax
show ip pim snooping neighbor [vlan vlan-id]
Parameters
vlan vlan-id
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
8.3.19.0
PIM-Sparse Mode (PIM-SM)
Description
Displays the VLAN interfaces with PIM-SM snooping
enabled.
Displays the PIM version number for each VLAN interface
with PIM-SM snooping enabled:
• v2 = PIM version 2
• S = PIM Sparse mode
Displays the number of neighbors learned through PIM-SM
snooping on the interface.
Displays the Designated Router priority value configured on
the interface (ip pim dr-priority command).
Displays the IP address of the Designated Router for that
interface.
Count
v2 3
(OPTIONAL) Enter a VLAN ID to display information about
PIM neighbors that PIM-SM snooping discovered on a
specified VLAN. The valid VLAN IDs range is from 1 to 4094.
EXEC
EXEC Privilege
Introduced on the S4820T.
DR DR
Prio
1 165.87.32.2
1289