Avaya DEFINITY Server CSI Maintenance Manual page 1279

Table of Contents

Advertisement

IPMEDPRO (IP Media Processor Circuit Pack)
Table 305. TEST #1406 MP Diagnostic Test
Error
Test
Code
Result
Description/ Recommendation
2012
ABORT
System error:
2100
ABORT
System resources required for this test are not available.
FAIL
the OOS state.
If the board continues to fail replace the board.
8192
FAIL
The FPGA DSP test failed:
-
8328
If the board continues to fail replace the board.
8448
FAIL
The TSI FPGS test failed:
-
8584
If the board continues to fail replace the board.
12288
FAIL
The TSI DSP test failed:
-
12424
If the board continues to fail replace the board.
555-233-119
1. Retry the command at 1-minute intervals a maximum of 5 times.
1. Retry the command at 1-minute intervals a maximum of 5 times.
The MP Diagnostic test has failed for this TN2302 and the board is in
1. Issue the busyout board UUCSS command.
2. Issue the reset board UUCSS command.
3. Issue the release board UUCSS command.
4. Issue the test board UUCSS long command.
1. Issue the busyout board UUCSS command.
2. Issue the reset board UUCSS command.
3. Issue the release board UUCSS command.
4. Issue the test board UUCSS long command.
1. Issue the busyout board UUCSS command.
2. Issue the reset board UUCSS command.
3. Issue the release board UUCSS command.
4. Issue the test board UUCSS long command.
1. Issue the busyout board UUCSS command.
2. Issue the reset board UUCSS command.
3. Issue the release board UUCSS command.
4. Issue the test board UUCSS long command.
Continued on next page
Issue 5 October 2002
1279

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents