Avaya DEFINITY Server CSI Maintenance Manual page 1613

SYS-PRNT (System Printer)
Link Retry Test (#215)
The Link Retry Test sends a message to the SYS-PRNT software process either
(1) to make a data call to the extension to which the SYS-PRNT output device
connects OR (2) to open the EIA port to the SYS-PRNT output device. If the
System Printer Link is already up, this test passes without making a data call or
opening the EIA port.
Table 466. TEST #215 Link Retry Test
Error Test
Code Result
10, 20 ABORT
30 ABORT
1010 ABORT
FAIL
PASS
555-233-119
Description/ Recommendation
Internal system error
1. Retry the command at 1-minute intervals a maximum of 2 times.
Internal system error
1. Refer to the ''Procedures for Restoring the System Printer Link''
for recommended maintenance strategy.
The System Printer Link has been busied out.
1. Enter the release sp-link command to release the System Printer Link
from the busyout state.
2. Reissue the test sp-link long command to execute the test.
The System Printer Link CANNOT be established.
1. Refer to the ''Procedures for Restoring the System Printer Link''
for recommended maintenance strategy.
The System Printer Link is up.
Continued on next page
Issue 5 October 2002
section
section
1613