Avaya DEFINITY Server CSI Maintenance Manual page 869

CARD-MEM (Memory Card)
Memory Card Format and Read Test (#696)
This is a non-destructive test, which reads the directory file from the memory card,
and verifies the integrity of the directory file.
Table 139.
TEST #696 Memory Card format and Read Test
Error Test
Code Result Description/Recommendation
2012 ABORT Internal System Error.
2106
1. Retry the command at one minute intervals a maximum of five times.
2114
2. If the test continues to abort, escalate the problem.
2013 ABORT Could not allocate the necessary system resources to run this test.
2100
1. Retry the command at one minute intervals a maximum of five times.
none
2. If the test continues to abort, escalate the problem.
2108 ABORT The NETCON circuit pack is not a TN777B circuit pack.
1. Follow the Standard Repair Procedures for replacing the NETCON circuit
2. Re-enter test card-mem.
2110 ABORT No memory card is inserted.
1. Insert a formatted memory card into the slot at the TN777B NETCON
2. Retry the command at one minute intervals a maximum of five times.
3. If the test continues to abort, escalate the problem.
2113 ABORT One of the two directories in the memory card is corrupted.
1. Re-enter test card-mem to verify the Test #699 passes.
2. If the test aborts again with this error code, replace the memory card.
FAIL System software cannot recognize the inserted memory card. The memory
card is not formatted, or the directories of the memory card are corrupted.
1. Replace the memory card with a new formatted memory card.
2. Retry the command at one minute intervals a maximum of five times.
3. If the test continues to abort, escalate the problem.
PASS The system recognizes the inserted memory card, and it can read the
directories from the memory card.
555-233-119
pack with the TN777B circuit pack.
circuit pack.
Continued on next page
Issue 5 October 2002
869