Avaya DEFINITY Server CSI Maintenance Manual page 1202

!
5. If you are self-downloading to a TN2501AP (VAL) circuit pack, reseat the
pack:
!
!
a. Release the latch handle to free the circuit pack from the carrier.
b. Pull the circuit pack out approximately 1-2 inches (2.54 to 5.08 cm.).
c. Re-insert the circuit pack into the carrier.
d. Close the latch securely.
Aborting a firmware download
If you need to abort a scheduled (pending) firmware download:
1. Type disable firmware download and press
This command
Remote download
This procedure allows you to update up to 50 target circuit packs of the same type
using a new firmware image file distributed from a TN799C/DP (C-LAN) source
circuit pack. This procedure updates these target circuit packs:
UDS1 (TN464GP, TN2464BP, and TN2313AP)
Maintenance/Test (TN771DP)
IP Media Processor (TN2302AP)
1202
Issue 5 October 2002
CAUTION:
The ftplogin and ftppassword will remain on the TN799DP (C-LAN)
and TN2501AP (VAL) circuit packs until they are reset or until you
issue the disable filesystem board <UUCSS> command.
WARNING:
To prevent electrostatic discharge (ESD), be sure to wear a
grounding strap while handling the circuit pack.
WARNING:
Ensure that both the top green and top amber LEDs are out.
Continues to download the firmware image file to circuit pack in
progress.
Aborts the remainder of the download schedule.
Clears the contents of the Firmware Download screen
.
Enter
(Screen
555-233-119
78).