Ext-Dev Admin? Y (External Device Alarm) - Avaya DEFINITY Server CSI Maintenance Manual

EXT-DEV ADMIN? Y (External Device Alarm)

EXT-DEV ADMIN? Y (External Device
Alarm)
MO Name (in Alarm
Alarm Log) Level
EXT-DEV MAJOR
EXT-DEV MINOR
EXT-DEV WARNING
NOTE:
Use this Maintenance Object when the External Device Alarm
Admin? field on the change system-parameters customer-options form is
set to y. You must have INADS or INIT login permission to administer
EXT-DEV Alarm.
Generic 3i Maintenance circuit packs each have alarm leads which can be
connected to external devices such as Uninterruptible Power Supplies (UPS) or
adjuncts such as AUDIX. Certain conditions on the external device close the
contacts on the alarm leads to notify the switch which in turn originates an
EXT-DEV alarm.
The special locations UUmajor and UUminor are used to designate the major or
minor maintenance board alarm connection for cabinet UU. The major/minor
designation specifies the port, not the alarm level associated with the connection;
for example, the "major" port can be administered as a major, minor, or warning
alarm, and the "minor" port can be administered as a major, minor or warning
alarm. In addition Analog line ports can also be administered as external device
alarms.
NOTE:
An unadministered maintenance board external device alarm port, that is
sensing a contact closure will have an entry in the Error Log and in the
Alarm Log. INADS will not receive warning alarms.
The Processor monitors the EXT-DEV alarm leads. The system only recognizes
pairs connected to the 1M and 1m (ALARM MONITOR) leads. Refer to the
DEFINITY Communications System Generic 1 and Generic 3i Wiring,
555-204-111, for more details.
555-233-119
Initial Command to Run
test eda-external-device-alrm physical
location
test eda-external-device-alrm physical
location
test eda-external-device-alrm physical
location
Full Name of MO
External Device Alarm
External Device Alarm
External Device Alarm
Issue 5 October 2002
1187