Avaya DEFINITY Server CSI Maintenance Manual page 1661

TDM-BUS (TDM Bus)
Error Log Entries and Test to Clear Values
Table 486. TDM Bus Error Log Entries
Aux
Error Type Data
1
0 0
1 0
18 (a) 0
35 (b) 0-1
257 (c) 0
513 (d) Any
769 (e) Any
769 (f) Any
1025 Any
3872 (g) Any
3873 (g) Any
3874 (g) Any
3877 (g) Any
1. Run the Short Test Sequence first. If all tests pass, run the Long Test Sequence. Refer to the
appropriate test description and follow the recommended procedures.
NOTE:
For TDM-BUS, an ON-BOARD alarm refers to a problem with the TDM-BUS
itself.
Notes:
a. The TDM Bus has been busied out by the technician. The error retires
when the technician releases the TDM Bus.
b. This error indicates the TDM Bus is corrupted.
An Aux Data value of 0 indicates the last reported TDM Bus corruption was
on the Control channel bus.
An Aux Data value of 1 indicates the last reported TDM Bus corruption was
on the Non-Control channel bus.
555-233-119
Associated Test
Any
Control Channel Test
(#296)
busyout tdm PC
TDM Bus Corruption
none
Idle Time Slot Test (#294)
Idle Time Slot Test (#294)
Idle Time Slot Test (#294)
none
none
none
none
Alarm On/Off
Level Board
Any Any
MINOR ON
WARNING ON
MINOR ON
MAJOR ON
MINOR ON
WARNING ON
Issue 5 October 2002
Test to Clear Value
test tdm
test tdm P r 3
release tdm PC
set tdm PC
test tdm P r 3
test tdm P r 3
(see Notes)
1661