Avaya DEFINITY Server CSI Maintenance Manual page 1363

MAPD-BD (MAPD Interface Circuit Pack TN802)
t. Error Type 3999: the circuit pack sent a large number of control channel
messages to the switch within a short period of time.
Error Type 1538
(hyperactivity)
also present?
Shutting down NT on the TN802
Before removing the TN802 circuit pack from the carrier, shut Windows NT
down first by following either procedure described in
Table 336. Windows NT shutdown procedures
Step Faceplate button
1. Push the recessed button on the front
faceplate and hold it in.
2. "M shut" flashes on the LCD display
3. When shutdown is complete, "MSHUT
#" displays ("#" is blinking).
4. Remove the circuit pack.
5.
6.
555-233-119
Then the switch:
Y Takes the circuit pack out-of-service due to hyperactivity
N Does not take the circuit pack out-of-service, but the circuit
pack has generated 50% of the messages necessary to be
considered hyperactive. This may be normal during heavy
traffic periods.
PC interface
Click on the "Start" button in the lower, lefthand
corner.
Click on "Shut Down."
Choose the "Shut down the computer?" radio
button.
Click on "OK."
Wait for the message indicating that shutdown
is complete.
Remove the circuit pack.
Table 336:
Continued on next page
Issue 5 October 2002
TM
1363