Advertisement
A V A Y A I n t u i t y
A U D I X M e s s a g e
S e r v e r
Lucent Definity G3 / Prologix
TRUNK
TDM
BUS
Minimum Software
With inband integration, one
pathway between the PBX and
Intuity system transmits both
call information and voice
communications
Avaya Intuity Requirements
PBX hardware requirements
Configuration Note 9109
Avaya Definity G3 / ProLogix
(in-band / mode code)
LINE
VOICE PATH
Analog
Interface Card
Multiple Return to Operator
Message Waiting On/Off
Automated Attendant
CPU
G3V6.1
1.0 METHOD OF INTEGRATION
With inband integration, one pathway between the PBX and the Intuity™
transmits both call information and voice communications. The pathway is
provided by 2-wire analog single-line circuits that connect to IVC6 Cards
in the Intuity system. The IVC6 simulates 2-wire analog lines. Calls to an
Intuity port are preceded by the called party information from the PBX in
DTMF format. The Intuity answers and plays the appropriate greeting.
Message-waiting indication is set and canceled using DTMF commands
over the same pathway.
2.0 AVAYA INTUITY ORDERING INFORMATION
•
Tip/Ring Voice Port Cards (IVC6), six analog connections per card
•
Serial and Inband Integration Software (FID 12 or higher)
•
INTUITY Software Release 5.0 or higher
3.0 PBX HARDWARE REQUIREMENTS
•
TN742 or TN746B Analog ports, one per Intuity port
3.1 PBX SOFTWARE REQUIREMENTS
•
Minimum Software: G3 V 6.1
Disclaimer: Configuration Notes are designed to be a general guide reflecting AVAYA Inc.'s experience configuring its systems.
These notes cannot anticipate every configuration possibility given the inherent variations in all hardware and software products.
Please understand that you may experience a problem not detailed in a Configuration Note. If so, please notify the TAC/TSO at
(408) 922-1822 and if appropriate we will include it in our next revision. AVAYA Inc. accepts no responsibility for errors or
omissions contained herein.
Intuity Audix
XXX
IVC6
Call ID
Outcalling
– Version A (7/03)
Minimum Software
Release 4.3
Advertisement
Table of Contents
Related Manuals for Avaya Definity G3 / ProLogix
Summary of Contents for Avaya Definity G3 / ProLogix
- Page 1 Please understand that you may experience a problem not detailed in a Configuration Note. If so, please notify the TAC/TSO at (408) 922-1822 and if appropriate we will include it in our next revision. AVAYA Inc. accepts no responsibility for errors or...
-
Page 2: Supported Features
1. Enter the command: change system-parameters customer- options and make sure the G3 Version (on the first line) is set to V6. The information contained in this document is provided by AVAYA Inc. to serve as a guide. See the disclaimer on page 1... - Page 3 This field is required when the ISDN-PRI option on the switch System-Parameters Customer-Options screen is enabled. The information contained in this document is provided by AVAYA Inc. to serve as a guide. See the disclaimer on page 1...
- Page 4 Don't Answer: Unanswered calls forward after the specified number of rings. All: All calls forward immediately without ringing the subscriber's station. The information contained in this document is provided by AVAYA Inc. to serve as a guide. See the disclaimer on page 1...
-
Page 5: Subscriber Administration
Select “Switch Interface Administration” menu Select “Switch Selection” menu Administer parameters as follows: Country: <Press F2 {CHOICES}>. Switch: Prologix Mode Code The information contained in this document is provided by AVAYA Inc. to serve as a guide. See the disclaimer on page 1... - Page 6 • Transfer Security Assignment Select “Voice System Administration” menu Select “Transfer Security” menu Assign restrictions if any used. The information contained in this document is provided by AVAYA Inc. to serve as a guide. See the disclaimer on page 1...
- Page 7 INTUITY Extension Length: 3 Switch Network Access Code: Switch Switch Switch INTUITY Switch Remote Prefix Start Ext. End Ext. Prefix Number[Y/N] The information contained in this document is provided by AVAYA Inc. to serve as a guide. See the disclaimer on page 1...
-
Page 8: Hardware Installation
(6 wires) to each RJ11 on the back of the IVC6 card. The information contained in this document is provided by AVAYA Inc. to serve as a guide. See the disclaimer on page 1... -
Page 9: Testing The Installation
Listen to the message left for the mailboxes above, delete the message and verify message waiting is turned off. The information contained in this document is provided by AVAYA Inc. to serve as a guide. See the disclaimer on page 1... - Page 10 NOTE: If you encounter problems while performing these tasks, review the “switch log” before escalating problems to your local Technical Support Center. The information contained in this document is provided by AVAYA Inc. to serve as a guide. See the disclaimer on page 1...
- Page 11 PBX. Therefore, when assigning analog ports to be used as bridged-appearances for The information contained in this document is provided by AVAYA Inc. to serve as a guide. See the disclaimer on page 1...
-
Page 12: Change History
Printed in U.S.A. AVAYA Inc. 1001 Murphy Ranch Road Milpitas, CA 95035-7912 (408) 321-2000 http://www.avaya.com The information contained in this document is provided by AVAYA Inc. to serve as a guide. See the disclaimer on page 1...
Need help?
Do you have a question about the Definity G3 / ProLogix and is the answer not in the manual?
Questions and answers