Sec-Cdr (Sec-Cdr Link Maintenance) - Avaya DEFINITY Server CSI Maintenance Manual

SEC-CDR (SEC-CDR Link Maintenance)

Speech Synthesis Parameter Update Test (#169)
This test updates the DTMF interdigit time-out parameter used by the Speech
Synthesis circuit pack to be consistent with that specified by the switch processing
element (SPE).
Table 454. TEST #169 Speech Synthesis Parameter Update Test
Error Test
Code Result
ABORT Could not allocate the necessary system resources to run this test.
1. Retry the command at 1-minute intervals a maximum of 5 times.
1000 ABORT System resources required to run this test are not available. The port may be
busy with a valid call and therefore unavailable for certain tests. You must wait
until the port is idle (yellow LED if off) before retesting.
1. If the port is idle, retry the command at 1-minute intervals a maximum of 5
2100 ABORT Could not allocate the necessary system resources to run this test.
1. Retry the command at 1-minute intervals a maximum of 5 times.
Any FAIL An internal system error has occurred.
PASS The DTMF interdigit time-out parameter has been updated.
1. User-reported troubles should be investigated using other tests and by
SEC-CDR (SEC-CDR Link
Maintenance)
MO Name (in Alarm
Log)
PRI-CDR/SEC-CDR
PRI-CDR/SEC-CDR
The SEC-CDR (SEC-CDR Link) maintenance strategy is covered in the
PRI-CDR/SEC-CDR (PRI-CDR Link) Maintenance documentation.
555-233-119
Description/ Recommendation
times.
verifying that other ports on this circuit pack are working correctly.
Alarm Level Initial Command to Run
MINOR test cdr-link primary/secondary l
WARNING test cdr-link primary/secondary
Continued on next page
Full Name of MO
CDR Link
CDR Link
Issue 5 October 2002
1587