Avaya DEFINITY Server CSI Maintenance Manual page 1420

Maintenance Objects
Use ''test failed ip-network-region''
retest every network-region connection marked as "failed". The connections that:
pass are returned to service
fail are remarked as "failed" and remain on the list of bad connections.
Error Log Entries and Test to Clear Values
Table 3-5. NR-CONN Error Log Entries
Error Aux
Type Data Associated Test
1(a) 0 Network Region Interconnectivity test
(#1417)
Note:
a. Error Type 1: One or more network-region connections have failed.
1. Enter
2. If so, enter
3. For each affected network region, check the error log for failures to
4. Enter test failed-ip-network-region to retest these paths.
5. If errors persist, escalate.
1420
Issue 5 October 2002
(Page 552) as an on-demand operation to
''display failed ip-network-region''
between pairs of network regions are failing.
''test failed ip-network-region''
related MOs, such as:
— ''IPMEDPRO (IP Media Processor Circuit Pack)'' on page
1265
— ''MEDPRO (Media Processor MAPD Circuit Pack)'' on page
1374
— ''CLAN-BD (Control LAN Circuit Pack)'' on page 875
— ''DIG-IP-STN (Digital IP Station)'' on page 1014
— ''RDIG-STA (Remote Digital Station)'' on page 1554
and resolve any problems.
Alarm On/Off
Level Board Test to Clear Value
MINOR ON
to verify that connections
to retest these paths.