Avaya DEFINITY Server CSI Maintenance Manual page 1372

Maintenance Objects
Table 349. TEST #146 Translation Update Test
Error Test
Code Result
ABORT
FAIL
PASS
0 NO
BOARD
1372
Issue 5 October 2002
Description/ Recommendation
Internal system error
1. Retry the command at 1-minute interval s a maximum of 5 times.
Internal system software error.
1. Verify the MAPD Interface circuit pack translation (display ds1 UUCSS).
Translation data has been downloaded to the MAPD Interface circuit pack
successfully.
The test could not relate the internal ID to the port (no board). This could be
due to incorrect translations, no board is inserted, an incorrect board is
inserted, or an insane board is inserted.
1. Ensure that the board translations are correct. Execute the add ds1
UUCSS command to administer the MAPD interface if it is not already
administered.
2. If the board was already administered correctly, check the error log to
determine whether the board is hyperactive. If this is the case, the board
is shut down. Reseating the board re-initializes the board.
3. If the board was found to be correctly inserted in step 1, then issue the
busyout board command.
4. Issue the reset board command.
5. Issue the release busy board command.
6. Issue the test board long command.
This should re-establish the linkage between the internal ID and the port.
Continued on next page