Avaya DEFINITY Server CSI Maintenance Manual page 942

Maintenance Objects
Error Log Entries and Test to Clear Values
Error Type Aux Data
none none
System Technician-Demanded Tests: Descriptions
and Error Codes
There are no errors associated with the CPAD CUST-ALM MO. The test
customer-alarm PC command allows a technician to check that the
customer-provided alarming device is correctly installed and functional. Run this
test at least once after the switch and the customer alarm have been installed.
Always investigate tests in the order presented in the table below when inspecting
errors in the system. By clearing error codes associated with the
Customer-Provided Alarming Device Test, for example, you may also clear errors
generated from other tests in the testing sequence.
Order of Investigation
Customer-Provided Alarming Device Test (#115)
1. D = Destructive; ND = Nondestructive
942
Issue 5 October 2002
Associated Test Alarm Level
none
On/Off Board
Short Test Long Test
Sequence Sequence
X
Test to Clear Value
1
D/ND
X ND
555-233-119