Detr-Bd (International Version); Did-Bd (Direct Inward Dial Trunk Circuit Pack) - Avaya DEFINITY Server CSI Maintenance Manual

DETR-BD (International Version)

DETR-BD (International Version)
MO Name (in
Alarm Log) Alarm Level
DETR-BD MINOR
DETR-BD WARNING
1. Where P is the port network number (1 for PPN); C is the carrier number (for example, A, B, or C);
SS is the address of the slot in the carrier where the circuit pack is located (for example, 01, 02, etc.).
The companding mode of the DETR-BD circuit pack must match the administered
mode for the system for proper tone detection. The companding mode is
administered on the System-Parameters Country-Options form. Refer to
Administrator's Guide for Avaya MultiVantage Software.
For all DETR-BD circuit pack level errors, refer to
Pack)'' Maintenance documentation.
DID-BD (Direct Inward Dial Trunk
Circuit Pack)
MO Name (in Alarm
Alarm Log) Level
DID-BD MIN
DID-BD WRN
1. Where P is the port network number (1 for PPN); C is the carrier designation (for example, A, B, or
C); and SS is the address of the slot in the carrier where the circuit pack is located (for example, 01,
02, etc.).
Refer to ''XXX-BD (Common Port Circuit Pack)''
circuit pack level errors. See DID-TRK (DID Trunk) Maintenance documentation
for related trunk information.
555-233-119
Initial Command to Run
test board PCSS
test board PCSS
Initial Command to Run
test board PCSS sh
test board PCSS sh
1
Full Name of MO
Tone Detector Circuit Pack
Tone Detector Circuit Pack
''XXX-BD (Common Port Circuit
1
Full Name of MO
Direct Inward Dial Trunk Circuit Pack
Direct Inward Dial Trunk Circuit Pack
Maintenance documentation for
Issue 5 October 2002
985