Mtp Sanity Handshake Test - Avaya DEFINITY Server CSI Maintenance Manual

PR-MAINT (Maintenance Processor)

MTP Sanity Handshake Test (#106)

This test is a nondestructive test. The MTP Sanity Handshake Test is simply a
query from a maintenance process to the MTP. The MTP must reply for the test to
pass.
Table 414. TEST #106 MTP Sanity Handshake Test
Error Test
Code Result
1029 ABORT
2014
2015
2016
2017
2018
2020
2022
2024
2025
2051
1000 ABORT
2033 ABORT
FAIL
PASS
555-233-119
Description/ Recommendation
Refer to STBY-SPE Maintenance documentation for a description of these
error codes.
System software resources required to run this test are not available.
Internal system error
1. Retry the command at 1-minute intervals a maximum of 5 times.
The MTP did not respond to the Sanity Handshake Query.
1. Re-enter command with the "long" option.
2. If the test continues to fail, replace the Processor circuit pack.
The MTP responded to the Sanity Handshake Query.
Continued on next page
Issue 5 October 2002
1519