Avaya DEFINITY Server CSI Maintenance Manual page 1746

Maintenance Objects
Table 519. TEST #604 TSC Heartbeat Inquiry Test — Continued
Error Test
Code Result
1145 ABORT
1146 ABORT
1147 ABORT
1148 ABORT
1746
Issue 5 October 2002
Description/ Recommendation
There is congestion in the network.
1. Issue the status tsc-administered command at 1-minute intervals a
maximum of 5 times.
2. If the congestion does not clear, disable and enable the Administered
TSC via the change sig-group <group> command. To disable the
Administered TSC, display the (administration) Signaling Group Form
via the change sig-group <group> command where <group> refers
to the number of the signaling group under which the suspect TSC is
administered. Change the
change the
Enable
3. If the congestion still does not clear, check other nodes in the network.
The congestion just occurred in the network.
1. Issue the status tsc-administered command at 1-minute intervals a
maximum of 3 times.
2. If congestion does not clear, disable and enable the Administered TSC
via the change sig-group <group> command. To disable the
Administered TSC, display the (administration) Signaling Group Form
via the change sig-group <group> command where <group> refers
to the number of the signaling group under which the suspect TSC is
administered. Change the
change the Enable
3. If congestion still does not clear, check the other nodes in the network.
The ADMTSC is being torn down.
1. Issue the status tsc-administered command at 1-minute intervals a
maximum of 3 times.
2. If ADMTSC is still down, disable and enable the ADM TSC via the
change sig-group <group> command. NOTE: To disable the
ADMTSC, display the (administration) Signaling Group Form via the
change sig-group <group> command where <group> refers to the
number of the signaling group under which the suspect TSC is
administered. Change the
change the Enable
3. If the ADMTSC is still down, check the other nodes in the network.
The ADMTSC is enabled, but inactive (near-end).
1. Disable and enable the ADMTSC.
2. Reissue the test tsc-administered command.
3. If the ADMTSC is still inactive, check the other nodes in the network.
Enable field to n. To enable the ADMTSC,
field to y.
field to n. To enable the ADMTSC,
Enable
field to y.
field to n. To enable the ADMTSC,
Enable
field to y.
Continued on next page