Avaya DEFINITY Server CSI Maintenance Manual page 1500

Maintenance Objects
TDM Looparound Test (#1285)
NOTE:
This test is destructive.
This test verifies whether the CLAN PPP port can send and receive data on the
TDM bus. This test has a tone generator send tones on a timeslot, and it has a
tone receiver receive tones on another timeslot. The tones are looped through the
ppp port.
If the received tones:
Match the tones sent
Do not match the tones sent
Test failure indicates failure of the
CLAN (TN799) circuit pack
TDM Bus
Tone generator / tone receiver circuit pack
Table 404. TEST #1285 TDM Looparound Test
Error Test
Code Result
1000 ABORT
1002 ABORT
1003 ABORT
1500
Issue 5 October 2002
Then:
The test passes
The test fails
Description/ Recommendation
The port is in use.
1. Determine port status (status clan-port UUCSSpp).
2. Retry the command when the port is idle. The port may be forced to the
idle state by executing a busyout port UUCSS command.
3. Escalate if the problem persists.
NOTE:
The busyout port command is destructive, causing all calls and links
associated with the port to be torn down.
No TDM bus timeslots available for the test.
1. Retry the command at 1-minute intervals, up to 5 times.
2. Escalate if the problem persists.
No more tone receivers idle for use in this test.
1. Retry the command at 1-minute intervals, up to 5 times.
2. Escalate if the problem persists.
Continued on next page