Avaya DEFINITY Server CSI Maintenance Manual page 858

Maintenance Objects
Incomplete Command Time-out
A time-out feature has been added to the MAINTENANCE-RELATED SYSTEM
PARAMETERS form (accessed by the command change system parameters
maintenance). This feature improves the operation of daily maintenance by
allowing maintenance routines to run that might otherwise not run. It also helps to
prevent the loss of translations that were not saved by the save translation
command, and were also not saved because daily maintenance was prevented
from running prior to the system reset. Highlights of the feature include:
Options for blank, 1, 2, 3, 4, 5, or 6 hours (the default is 2 hours)
The blank option indicates that the feature is not active
Only commands that block the running of daily maintenance (add, change,
duplicate, remove, and set) are affected
All logins will time-out if any of these commands are active for the
prescribed time (except for the "blank" option)
The feature applies to all logins, regardless of type (init, dadmin, craft,
inads) or permissions granted to the specific login ID of an administration
or maintenance user
The corresponding "time-out" entry is appended to the list history log
The Command Time-out field can be viewed by customer administrators. A
craft, init, dadmin, or inads login is required to change the option for the field.
Screen 73 on page 1068
PARAMETERS screen for DEFINITY R9r.
example of the LIST HISTORY form with the "time-out" entry. The final line
indicates that change system-parameters maintenance was being executed
when the time-out period of 2 hours expired.
858
Issue 5 October 2002
shows the MAINTENANCE-RELATED SYSTEM
Screen 74 on page 1068 shows an
555-233-119