Table 253. TEST #124 Emergency Transfer Query Test
Error
Test
Code
Result
1000
ABORT
2000
ABORT
2029
ABORT
1
FAIL
2
FAIL
PASS
Table 254. Test #124 Error Log Entries That Cause Emergency Transfer
SW-CTL
SW-CTL
TONE-BD
TONE-BD
1164
Issue 5 October 2002
Description/Recommendation
System resources required to run this test are not available.
1. Retry the command at 1-minute intervals a maximum of 5 times.
Response to the test request was not received within the allowable time
period.
1. Retry the command at 1-minute intervals a maximum of 5 times.
2. If the test continues to ABORT with error code 2000, check for system
powering problems with the A carrier. Resolve all CABINET alarms.
Then, repeat the test.
Internal system error
1. Retry the command at 1-minute intervals a maximum of 5 times.
Emergency Transfer is manually turned OFF via the Emergency Transfer
switch.
Emergency Transfer is manually turned ON via the Emergency Transfer
switch.
1. Place the switch in the AUTO position.
The system software has control of Emergency Transfer. If Emergency
Transfer is invoked, then there can be a Major alarm in the system that is
invoking Emergency Transfer.
may cause Emergency Transfer. If any or all of these errors appear in the
log, then refer to the appropriate Maintenance documentation and resolve
those problems first.
If none of these errors appear in the log, then check the Emergency
Transfer hardware.
MO Name
Table 254
lists the error types and MOs that
Continued on next page
Error Type
1
2
1
2305
Continued on next page
Aux Data
0
0
555-233-119
Need help?
Do you have a question about the DEFINITY Server CSI and is the answer not in the manual?