Avaya DEFINITY Server CSI Maintenance Manual page 1607

SYS-LINK (System Links)
Test command for the system links, test sys-link PCSSpp can be specified with
current or faulted as an optional argument if the user wishes to test all the
components in the specified path. The tests executed will be the same if the user
were to test each component manually. In the event that the user does not specify
any path, then only the tests specified for the system links are executed.
Order of Investigation
System Link Status (#985)
1. D = Destructive, ND = Non-destructive
System Link Status (#985)
This non-destructive test queries the switch for the status of the system link and
verifies that all switch components have the same view of the link state.
Table 463. TEST #985 System Link Status
Error Test
Code Result
1007 ABORT Could not locate the system link associated with this location
2500 ABORT Internal system error
6 FAIL The system link is down.
PASS The system link is up.
555-233-119
Description/ Recommendation
1. Retry the command at 1-minute intervals for a maximum of 5 times.
1. Retry the command at 1-minute intervals for a maximum of 5 times.
1. Follow the procedure for error type 13.
Short Test Long Test
Sequence Sequence
X X
Issue 5 October 2002
1
D/ND
N
1607