Avaya DEFINITY Server CSI Maintenance Manual page 847

CABINET (Cabinet Sensors)
Fan and Filter Removal/Replacement
1. Remove the left door.
2. Remove the fan/filter access panel. See
Figure 25. Fan/Filter Removal
Fan Assembly Removal/Replacement
1. Pull (unplug) the fan assembly from the chassis using the thumb/finger
notch provided. The power for the fan automatically disconnects when the
assembly is unplugged.
2. Plug in the new fan assembly. The power for the fan automatically
connects when the fan assembly in plugged in.
3. Replace the fan/filter access panel and the left door.
Fan Filter Removal/Replacement
1. Remove the fan access panel from the left side of the cabinet.
2. Pull the fan filter from the chassis.
3. Clean (vacuum or wash with water) or replace the filter as needed and
slide the filter back into the chassis.
4. Replace the fan access panel.
555-233-119
Figure 25.
Issue 5 October 2002
847