Dig-Ip-Stn (Digital Ip Station) - Avaya DEFINITY Server CSI Maintenance Manual

DIG-IP-STN (Digital IP Station)

MO Name (in
Alarm Log)
DIG-IP-STN
The Softphone has some level of existing DCP maintenance in the form of audits,
and updates. In addition, it also has error log entries and test to clear values.
In addition this MO covers a new Avaya Voice terminal that communicates to the
switch via an IP LAN. This type of terminal, referred to as an IP Phone is made up
of the 46XX line of terminals. This terminal emulates DCP signaling carried over
TCP.
This station type is not attached to a port board. Insertion of the station is not
driven by board insertion, rather it is driven by successful registration of the
endpoint. It is maintained via a set of explicit TCP/IP ping requests and errors
reported by the User Manger software, which terminates the H.323 signaling
portion of each endpoint. The MO follows standard maintenance methodology
and supports test, busyout, release and status commands.
Maintenance for Softphone includes Error Log Entries and Test to Clear Values.
See Table 193,
Table 193. DIG-IP-STN Digital IP Station Error Log Entries
Error Aux
Type Data Associated Test
0 0 Any
1(a) Registration Status Inquiry
(#1372)
18(b) 0 Busyout port or station
257(c) Signaling Path PING Test
(#1373)
(d) Digital Terminal Lamp
Update (#16)
(e) Digital Terminal Audit
Update (#17)
513(f) Any Station Digital AUDIT Test
(#17)
1281(g) Any Station Digital AUDIT Test
(#17)
1014
Issue 5 October 2002
Initial Command to
Alarm Level Run
WARNING test station extension
DIG-IP-STN Digital IP Station Error Log
Alarm
Level
Any
WARNING
WARNING
WARNING
WARNING
WARNING
WARNING
WARNING
Full Name of MO
Digital IP Station
Entries.
On/Off
Board Test to Clear Value
test station extension
OFF
OFF release port (or)
station
OFF
OFF
OFF
OFF test port or station
OFF test port or station
Continued on next page
555-233-119