Avaya DEFINITY Server CSI Maintenance Manual page 1204

2. Type ping <source_ip_address> and press
communication link to the source board.
3. Type ftp <source_ip_address> and press
4. Log in to the source circuit pack with the same ftplogin and ftppassword
that you used in the
5. Type bin and press
This transfers files in binary format.
6. Type put <filename.ext> and press
This command copies the new firmware image file to the destination
directory.
7. Type dir and press
Verify that the new firmware image file is on the circuit pack.
8. Type quit and press
This ends the FTP session.
Verify files
From the SAT verify that the new firmware image file is on the circuit pack.
1. Type list directory board <UUCSS> and press
The List Directory screen
2. Verify that the new firmware image file is listed in the File/Directory
Name field.
list directory board 1C12
Board
Location
01C12 F:fwdlimg464gv01
01C13 F:fwdlimg2302av01
D = Directory F = File
Screen 79. List Directory screen
1204
Issue 5 October 2002
''Set up file system on circuit pack''
ftplogin is any temporary login for this FTP session (for example,
denver)
ftppassword is any temporary login, minimum 7 characters, for this
FTP session (for example, broncos).
.
Enter
.
Enter
.
Enter
(Screen
LIST DIRECTORY
File/Directory
Name
to verify a
Enter
.
Enter
section.
.
Enter
.
Enter
79) displays.
Creation
Date Time
2000/01/01 00:00:00
2000/02/29 23:59:59
Page 1
Size
Kb
367
493
555-233-119