Avaya DEFINITY Server CSI Maintenance Manual page 1602

Maintenance Objects
System Technician-Demanded Tests: Descriptions
and Error Codes
Always investigate tests in the order presented in the table below. By clearing
error codes associated with the Test Synchronization Test, for example, you may
also clear errors generated from other tests in the testing sequence.
Order of Investigation
Test Synchronization Test (#417)
1. D = Destructive; ND = Nondestructive
Test Synchronization Test (#417)
This test updates all the Synchronization Maintenance component circuit packs
with the correct information regarding their role in providing synchronization for
the system. All the Tone-Clock and DS1 Interface circuit packs in the system are
updated via this test. This test will either pass or abort.
Table 461. TEST #417 Test Synchronization Test
Error Test
Code Result
ABORT
PASS
1602
Issue 5 October 2002
Description/ Recommendation
Internal system error
1. Retry the command at 1-minute intervals a maximum of 5 times.
The Synchronization Maintenance component circuit pack parameters have
been successfully updated. The system should be synchronized after
successful execution of this test. If synchronization problems still exist, refer
to the Error Log to obtain information regarding the source of the problem.
Short Test Long Test
Sequence Sequence
X X
1
D/ND
ND
Continued on next page