Avaya DEFINITY Server CSI Maintenance Manual page 1525

PR-MEM (RISC Memory)
System Technician-Demanded Tests: Descriptions
and Error Codes
Always investigate errors in the order in which they are presented in the table that
follows when you are inspecting errors in the system. By clearing error codes
associated with the Read All Memory Test, for example, you may also clear errors
generated from other tests in the testing sequence.
Order of Investigation
Processor Cache Test (#895)(a)
Processor Cache Audit (#896)(a)
Processor Bus Time-out Exception Test (#82)(a)
Processor BOOTPROM Checksum Test (#897)(a)
Processor Write Buffer Test (#900)(a)
Memory Burst Read Test (#908)
Read All Memory Test (#85)
Memory Parity Error Detection Test (#87)
Flash Memory Checksum Test (#86)
Memory Functional Test (#332) (b)
MTP Outpulse Relay Test (#102) (c)
MTP External Modem Present Test (#230) (c)
MTP Analog Loop Around Test (#103) (c)
MTP Sanity Handshake Test (#106) (c)
MTP SAT Loop Around Test (#228) (c)
MTP Aux Loop Around Test (#229) (c)
MTP Reset Test (#101) (c)
MTP Dual Port Ram Test (#104) (c)
1. D = Destructive; ND = Nondestructive
Notes:
a. Refer to
description of these tests.
b. This test is run only via a reset system 4 command or a reset system 5
command.
c. Refer to
tests.
555-233-119
''PROCR (RISC Processor Circuit Pack TN2402/TN798)''
''PR-MAINT (Maintenance Processor)''
Short Test Long Test
Sequence Sequence
X
X X
X X
X X
X X
X X
X
X X
X
X
X X
X X
X X
X X
X X
X X
X
X
Continued on next page
for a description of these
Issue 5 October 2002
1
D/ND
ND
ND
ND
ND
ND
ND
ND
ND
ND
D
ND
ND
ND
ND
ND
ND
D
D
for a
1525