Avaya DEFINITY Server CSI Maintenance Manual page 1217

Table of Contents

Advertisement

FW-DWNLD (Firmware Download)
Test Firmware Download (#1413)
This is a destructive test.
This test has two functions and can only be executed if there is a download
schedule to verify or there are FW-DWNLD errors to be resolve and alarms to
clear.
1. This test verifies that the information on the FIRMWARE DOWNLOAD
screen is correct. It also verifies that the source board is of the correct type,
that the file to be downloaded is present on that source board, and that the
file is error free. In addition it verifies that the target board code and suffix
are correct. It also retrieves the new firmware vintage for the target board
and populates the appropriate field in the firmware download table.
2. If this test is executed after a FIRMWARE DOWNLOAD schedule has run,
and there are FW-DWNLD alarms/errors, it resolves the errors, clears the
alarms, copies the current download status table to the last table, and
clears out the current table.
Table 276. TEST #1413 Firmware Download Test
Error
Test
Code
Result
Description/ Recommendation
ABORT
Internal system error
Retry the command at 1-minute intervals a maximum of 5 times.
2100
ABORT
System resources required for this test are not available.
Retry the command at 1-minute intervals a maximum of 5 times.
1
FAIL
The firmware image file entered on the change firmware download
screen is not present on the source board specified in the screen:
Execute the list directory command and verify that a file system is
enabled on the board and the file is present.
If the file system is not enabled, execute the enable filesystem
command and FTP the correct firmware image to the source board. If
the correct image file is present, then the name entered on the screen
is incorrect.
Execute the change firmware download command and enter the
correct file name.
2
FAIL
The image file header on the source board is invalid.
FTP a good firmware image file to the source board
3
FAIL
Firmware image file on the source board has a bad CRC.
FTP a good firmware image file to the source board.
555-233-119
Continued on next page
Issue 5 October 2002
1217

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents