System (System) - Avaya DEFINITY Server CSI Maintenance Manual

Maintenance Objects

SYSTEM (System)

MO Name (in
Alarm Log)
SYSTEM
1. SYSTEM only has errors associated with it and thus only appears in the Error Log
and not in the Alarm Log. There are no tests that can be run with SYSTEM.
SYSTEM is generally used when software encounters a problem with either
hardware or itself and requests a restart to clear the problem. SYSTEM also logs
errors that cannot be associated with any single process. This is not a problem.
The initcauses log should also confirm that a software-requested restart was
performed.
Error Log Entries and Test to Clear Values
The Aux Data field may be 0 or the return code from a bad software call, and the
following examples in no way exhaust the possibilities. Often, two errors are
logged at the same time for each problem.
Table 467. System Error Log Entries
Error Aux
Type Data
1
0 0
8 (a) 0
9 (b) Any
10 (c) Any
21 (d)
133(e) 0
355 (f) Any
356 (g) Any
601 (h)
602 (i)
603 (j)
1. Run the Short Test Sequence first. If all tests pass, run the Long Test Sequence. Refer to the
appropriate test description and follow the recommended procedures.
1614
Issue 5 October 2002
Alarm
Level Initial Command to Run
None None
Associated Test
Any
None
None
None
None
None
None
None
None
None
None
1
Alarm On/Off
Level Board
Any Any
Full Name of MO
SYSTEM
Test to Clear Value
None