Avaya DEFINITY Server CSI Maintenance Manual page 841

BRI-SET, ASAI-ADJ, BRI-DAT
Table 128.
TEST #629 BRI Layer 3 Query
Error Test
Code Result
2069 ABORT The endpoint has returned an error response to the switch sent application
message.
2000 FAIL No response is received from the endpoint or the adjunct. For BRI endpoints:
PASS The endpoint has successfully responded to the switch's application
message.
555-233-119
— Continued
Description/ Recommendation
1. Retry the command at 1-minute intervals a maximum of 5 times.
1. Consult the endpoint documentation to determine if ISDN-BRI
Management and Maintenance Procedures are supported. If not
supported, use change station extension and set the
Supported field to n. Use busyout station extension and release
station extension to busyout and release the endpoint to resolve any
endpoint alarms resulting from failure of this test.
2. If the endpoint supports these procedures and the test continues to fail,
assume the endpoint is defective and replace it.
MIMs
Continued on next page
Issue 5 October 2002
841