Hyb-Bd (Hybrid Line Circuit Pack); Hyb-Line (Hybrid Line) - Avaya DEFINITY Server CSI Maintenance Manual

HYB-BD (Hybrid Line Circuit Pack)

MO Name (in
Alarm Log)
HYB-BD
HYB-BD
1. Where P is the port network number (1 for PPN); C is the carrier designation (for
example, A, B, or C); and SS is the address of the slot in the carrier where the circuit
pack is located (for example, 01, 02, etc.).
Refer to ''XXX-BD (Common Port Circuit Pack)''
circuit pack level errors. See also
documentation for related line information.

HYB-LINE (Hybrid Line)

MO Name (in
Alarm Log)
HYB-LINE
HYB-LINE
1. Where P is the port network number (1 for PPN); C is the carrier designation (for
example, A, B, or C); SS is the address of the slot in the carrier where the circuit pack
is located (for example, 01, 02, etc.); and pp is the 2-digit port number (for example,
01).
Hybrid Line is the user-friendly name for Hybrid Line, which was previously used
to denote the Multifunction Analog Telephone. The Hybrid Line set is also known
as an SCS (Small Communications System).
The TN762B Hybrid Line circuit pack supports eight of these multifunction analog
telephone sets, as shown in the following figure. The Hybrid Line sets use three
pairs of wires: an analog voice pair, a transmit/receive pair, and a power pair.
1236
Issue 5 October 2002
Alarm Initial Command to
Level Run
MIN test board PCSS sh
WRN test board PCSS sh
''HYB-LINE (Hybrid Line)''
Alarm Initial Command to
Level
Minor test port PCSSpp l
Warning test port PCSSpp l
1
Full Name of MO
Hybrid Line Circuit Pack
Hybrid Line Circuit Pack
Maintenance documentation for
Maintenance
1
Run Full Name of MO
Hybrid Line
Hybrid Line
555-233-119