Time-Day (Time Of Day) - Avaya DEFINITY Server CSI Maintenance Manual

Maintenance Objects

TIME-DAY (Time of Day)

MO Name (in
Alarm Log)
TIME-DAY
The time of day contains the current year, month, day of the week, day of the
month, hour, minute, and second. The Time of Day maintenance object is
responsible for monitoring the time-of-day clock and raising an alarm if the
time-of-day clock is not set or cannot be read by the software. If the time-of-day
clock is not set or cannot be read by the software, many features such as
Time-of-Day Routing, CDR, ISDN Call-by-Call, Duplication, and so on will be
either inoperative or incorrect. The time-of-day clock should be set using the set
time command whenever the system is initially powered up or the TN1648
SYSAM circuit pack is replaced.
The time-of-day clock can be read with the display time command and set via the
set time command. The time-of-day clock resides on the TN1648 SYSAM circuit
pack and has a backup battery to save the time of day during power failures. If the
TN1648 SYSAM circuit pack is physically removed from the carrier, the contents
of the time-of-day clock is lost and the time of day must be set when the TN1648
SYSAM circuit pack is re-inserted.
Error Log Entries and Test to Clear Values
Table 507. Time of Day Error Log Entries
Error Aux
Type Data
0 0 Any
1
247 0 none
1. This error indicates that software cannot read the time-of-day clock on the TN1648 SYSAM
circuit pack. During this condition, all time stamps on Alarm Log entries, Hardware Error Log
entries, and Software Error Log entries are potentially inaccurate. In addition, any features that
are sensitive to the time of day (such as SMDR, Time-of-Day Routing, ISDN Call-by-Call) will not
function correctly.
1716
Issue 5 October 2002
Alarm Initial Command To
Level
MINOR set time
Alarm
Associated Test
Any
MINOR
Run Full Name of MO
Time of Day
On/Off
Level Board
Any display time
OFF set time
Test to Clear Value