Avaya DEFINITY Server CSI Maintenance Manual page 1557

RDIG-STA (Remote Digital Station)
3. Terminal Administration
A downloadable terminal is automatically downloaded when translation
changes associated with downloadable parameters are made as part of
system administration. As shown in the previous table, these changes can
be for a specified terminal or may be system-wide. If the change is for a
system-level parameter, a background global update request must be
submitted to download all programmable terminals.
4. Port Insertion
Whenever maintenance software initiates a request to place a port into
service, a terminal download action is begun on that terminal, if that
terminal is programmable. This port insertion action occurs under the
following circumstances:
5. Audits
As part of periodic maintenance, the Hardware Status Audit Test queries
programmable terminals to determine which levels and/or options are
being used. If the reported values are not equal to the administered values,
the system will initiate a terminal download action; however, this audit does
NOT check the parameters used for softkeys.
6. Activation of TTI
A terminal is downloaded automatically when it is activated using the
Terminal Translation Initialization (TTI) feature. Therefore, no special user
actions are required for TTI.
555-233-119
NOTE:
This global update may take more than an hour for a system with
several thousand programmable terminals.
A digital line circuit pack that is physically inserted into the system
and has ports currently administered for programmable terminals.
A station port is added to the system by an add station or change
station command.
A TTI port is activated.
NOTE:
Plugging the station cord into a terminal does not automatically cause
the terminal to be downloaded. If this terminal has factory defaults or
if the terminal has been previously downloaded with parameters
different than those desired, use one of the demand download
actions described below to download the terminal.
Issue 5 October 2002
1557