Avaya DEFINITY Server CSI Maintenance Manual page 1205

FW-DWNLD (Firmware Download)
Schedule download
1. Fill in all of the fields in
2. In the Target Location field, type the UUCSS address of each
similar-type, programmable circuit pack (up to 50).
If you do not know the target board locations:
a. Type list configuration all and press
555-233-119
Table 270
NOTE:
If you are scheduling firmware downloads for a circuit pack that is
designated as primary/secondary sync (timing) source (for example,
TN464GP), this procedure automatically redesignates a local timing
source during the download. After the download is complete and the
circuit pack is returned to service, the procedure designates the
original circuit packs as the timing source.
NOTE:
The target circuit packs are automatically busied out before the
firmware is downloaded to them and automatically returned to service
after the download is completed. While a DS1 circuit pack is busied
out, any active calls through that circuit pack are dropped.
NOTE:
You can only download one image file to a similar type circuit pack at
a given time (for example, to all the TN464GP circuit packs). The
download process does not support broadcasting more than one
image file to different-type circuit packs (for example, from TN464GP
to TN2313BP).
The System Configuration screen
except the Target Location field.
.
Enter
(Screen 80) appears.
Issue 5 October 2002
1205