Isdn-Sgr (Isdn-Pri Signaling Group) - Avaya DEFINITY Server CSI Maintenance Manual

ISDN-SGR (ISDN-PRI Signaling Group)

ISDN-SGR (ISDN-PRI Signaling
Group)
MO Name (in
Alarm Log)
ISDN-SGR
ISDN-SGR
1. Where <group> is a number 1-8 and the test sequence can be either s (short) or l (long).
An ISDN-PRI Signaling Group is a collection of DS1/UDS1 ISDN Trunks or PRI
endpoint ports (B-channels) for which a given ISDN-PRI Signaling Link Port
(D-channel) carries signaling information. ISDN-PRI requires the use of one of the
following DS1 interface circuit packs:
TN767B or later
TN464C or later
TN2242 or later
TN2464 or later
See DS1-BD and UDS1-BD Maintenance documentation for a description of
these circuit packs. See DS1/CEPT1/ISDN-PRI Reference, 555-025-101, for
more information on ISDN.
For 24-channel interfaces, the first 23 ports on the circuit pack are used as
B-channels. The 24th port may be used as a B-channel or as a D-channel
depending on the type of Signaling Group used (see
555-233-119
Alarm Initial Command to
Level Run
MINOR test sig-group <group>
WARNING test sig-group <group>
24-channel with ISDN-PRI D-channel over PI-BD
24- or 32-channel with ISDN-PRI D-channel over PI-BD
1
Full Name of MO
ISDN-PRI Signaling Group
ISDN-PRI Signaling Group
Figure 33).
Issue 5 October 2002
1287