Ip Igmp Query-Max-Response-Time - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

ip igmp query-max-response-time

ip igmp query-max-response-time tenthsOfaSecond
Syntax
no ip igmp query-max-response-time
Command introduced before JUNOSe Release 7.1.0.
Release Information
Specifies the period in tenths of a second during which the host is expected to respond
Description
to an IGMP query. IGMP version 2 includes this value in IGMP query messages sent
out on the interface. You cannot set this value on interfaces running IGMP version
1. The no version restores the default value, 100 tenths of a second (10 seconds).
Options
Interface Configuration, Profile Configuration
Mode
tenthsOfaSecond Time interval between receipt of an IGMP query and the
response; in the range 1–254 tenths of a second.
Chapter 10: I Commands
ip igmp query-max-response-time
815