Mark-User-Priority - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual
Software for e series broadband services routers command reference a to m
Hide thumbs
Also See for JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010:
- Manual (282 pages)
Table of Contents
Advertisement
mark-user-priority
Syntax
Release Information
Description
Options
Mode
Related Topics
Copyright © 2010, Juniper Networks, Inc.
[ no ] [ suspend ] mark-user-priority userPriorityValue
Command introduced before JunosE Release 7.1.0.
Defines a policy rule that specifies the value of the 802.1p VLAN user priority bits. The no
version removes the rule from the policy list; the suspend version temporarily suspends
the policy rule; the no suspend version resumes application of a suspended rule.
NOTE: This command replaces the Policy List Configuration version of the
mark-user-priority command, which may be removed completely in a future release.
userPriorityValue—EXP bit value assigned to packets; number in the range 0–7
Classifier List Configuration
Policy Rule Precedence
Chapter 13: M Commands
1261
Advertisement
Table of Contents
Need help?
Do you have a question about the JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 and is the answer not in the manual?