Member-Vlan - Dell MXL 10GbE Reference Manual

secondary
interface
control-vlan
vlan-id
Defaults none
Command CONFIGURATION (conf-frrp)
Modes
Command
Version 9.2(0.0)
History
Usage This command causes the Ring Manager to take ownership of the two ports after
Information IFM validates the configuration. Ownership is relinquished for a port only when the
interface does not play a part in any control VLAN, that is, the interface does not
belong to any ring.
Related show frrp
Commands

member-vlan

Specify the member VLAN identification numbers.
Syntax
member-vlan {vlan-range}
To return to the default, use the no member-vlan [vlan-range] command.
530
• Fast Ethernet interface: enter the keyword
FastEthernet then the slot/port information.
• Port Channel interface: enter the keyword port-
channel then a number. The range is from 1 to 128.
• 10-Gigabit Ethernet interface: enter the keyword
TenGigabitEthernet then the slot/port information
• 40-Gigabit Ethernet interface: enter the keyword
fortyGigE then the slot/port information
Enter the keyword secondary to configure the secondary
interface then one of the following interfaces and slot/port
information:
• Fast Ethernet interface: enter the keyword
FastEthernet then the slot/port information.
• Port Channel interface: enter the keyword port-
channel then a number. The range is from 1 to 128.
• 10-Gigabit Ethernet interface: enter the keyword
TenGigabitEthernet then the slot/port information
• 40-Gigabit Ethernet interface: enter the keyword
fortyGigE then the slot/port information
Enter the keyword control-vlan then the VLAN ID. The
range is from 1 to 4094.
Introduced on the MXL 10/40GbE Switch IO Module.
— displays the resilient ring protocol configuration information.
Force10 Resilient Ring Protocol (FRRP)