Debug Ip Pim - Dell Force10 S4810P Reference Manual

Command History
Version 8.3.11.1
Version 8.3.7.0
Version 8.1.1.0
Version 7.8.1.0

debug ip pim

View IP PIM debugging messages.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax debug ip pim [bsr | events | group | packet [in | out] |
register | state | timer [assert | hello | joinprune |
register]]
To disable PIM debugging, use the no debug ip pim command or use the undebug
all to disable all debugging command.
Parameters
bsr
events
group
packet [in | out]
register
state
timer [assert |
hello | joinprune |
register]
Defaults Disabled.
Command Modes EXEC Privilege
1236
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
(OPTIONAL) Enter the keyword bsr to view PIM Candidate RP/BSR
activities.
(OPTIONAL) Enter the keyword group to view PIM messages for a
specific group.
(OPTIONAL) Enter the keyword group to view PIM messages for a
specific group.
(OPTIONAL) Enter the keyword packet to view PIM packets. Enter
one of the optional parameters:
• in: to view incoming packets
• out: to view outgoing packets
(OPTIONAL) Enter the keyword register to view PIM register
address in dotted decimal format (A.B.C.D).
(OPTIONAL) Enter the keyword state to view PIM state changes.
(OPTIONAL) Enter the keyword timer to view PIM timers. Enter one
of the optional parameters:
• assert: to view the assertion timer
• hello: to view the PIM neighbor keepalive timer
• joinprune: to view the expiry timer (join/prune timer)
• register: to view the register suppression timer