Debug Frrp - Dell MXL 10GbE Reference Manual

•
•
•
Example
Dell#clear frrp
Clear frrp statistics counter on all ring [confirm] yes
Dell#clear frrp 4
Clear frrp statistics counter for ring 4 [confirm] yes
Dell#
Related show frrp
Commands

debug frrp

Clear the FRRP statistics counters.
Syntax
debug frrp {event | packet | detail} [ring-id] [count number]
To disable debugging, use the no debug frrp {event | packet | detail}
{ring-id} [countnumber] command.
Parameters
event
packet
detail
ring-id
count number
Defaults Disabled.
Command CONFIGURATION (conf-frrp)
Modes
Command
Version 9.2(0.0)
History
Usage Because the resilient ring protocol can potentially transmit 20 packets per
Information interface, restrict debug information.
528
hello Rx and Tx counters
Topology change Rx and Tx counters
The number of state change counters
— displays the resilient ring protocol configuration.
Enter the keyword event to display debug information
related to ring protocol transitions.
Enter the keyword packet to display brief debug
information related to control packets.
Enter the keyword detail to display detailed debug
information related to the entire ring protocol packets.
(Optional) Enter the ring identification number. The range is
from 1 to 255.
Enter the keyword count then the number of debug
outputs. The range is from 1 to 65534.
Introduced on the MXL 10/40GbE Switch IO Module.
Force10 Resilient Ring Protocol (FRRP)