Tunnel Mpls Fast-Reroute - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

tunnel mpls fast-reroute

Syntax
Release Information
Description
Options
Mode
1360
[ no ] tunnel mpls [ traffic-eng ] fast-reroute
Command introduced before JunosE Release 7.1.0.
Configures local protection for the ingress router of the primary LSP by causing RSVP-TE
to signal at LSP setup that the primary LSP needs local protection. The no version removes
the configuration.
traffic-eng—Specifies optional keyword for compatibility with non–E Series
implementations
Interface Configuration
Copyright © 2010, Juniper Networks, Inc.