Snmp Trap Ip Link-Status - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

snmp trap ip link-status

Syntax
Release Information
Description
Mode
Copyright © 2010, Juniper Networks, Inc.
snmp trap ip link-status
no snmp trap ip
Command introduced before JunosE Release 7.1.0.
Enables link status traps on an IP interface. The no version disables link status traps on
an IP interface.
Interface Configuration
Chapter 7: S Commands
1215