Tcp Resequence-Buffers Default-Connection-Maximum - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

tcp resequence-buffers default-connection-maximum

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
[ ip ] tcp resequence-buffers default-connection-maximum defaultConnMaxValue
no [ ip ] tcp resequence-buffers default-connection-maximum
Command introduced before JunosE Release 7.1.0.
ip keyword made optional in JunosE Release 7.2.0.
Specifies the default buffer limit assigned to all TCP connections on a virtual router unless
a specific limit is set for the VR in which the connection is established. Specifying a value
of zero (0) buffers turns off the default limit. The no version reverts the connection
maximum value to its default (10 buffers).
ip—Optional keyword for use with older scripts
defaultConnMaxValue—Default number of maximum buffers for newly created
connections on a virtual router, in the range 1–65535
Global Configuration
Chapter 8: T Commands
1285