Tunnel Mdt - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

tunnel mdt

Syntax
Release Information
Description
Mode
1352
[ no ] tunnel mdt
Command introduced before JunosE Release 7.1.0.
Enables multicast distribution tree operation by allowing the IP tunnel component to
create an MDT interface. This command functions for static GRE and DVMRP tunnel
interfaces only. The no version disables MDT on the interface.
Interface Configuration
Copyright © 2010, Juniper Networks, Inc.