JunosE 11.3.x Command Reference Guide N to Z
transform-set
Syntax
Release Information
Description
Options
Mode
1334
transform-set transform0
[ transform1 [ transform2 [ transform3 [ transform4 [ transform5 ] ] ] ] ]
no transform-set
Command introduced before JunosE Release 7.1.0.
Specifies the transform set(s) that an IPSec transport connection can use to negotiate
a transform algorithm. You can specify up to six transform algorithms. The no version
resets the transform to the default, esp-3des-hmac-sha.
transform0 through transform5—AH or ESP transform; use the online Help to view
available transforms
IPSec Transport Profile Configuration
Copyright © 2010, Juniper Networks, Inc.