Triggered-Update-Disable - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

triggered-update-disable

Syntax
Release Information
Description
Mode
1340
[ no ] triggered-update-disable
Command introduced before JunosE Release 7.1.0.
Specifies that RIP does not send triggered routing updates. The no version restores the
default condition, wherein RIP does send triggered updates.
Address Family Configuration, Router Configuration
Copyright © 2010, Juniper Networks, Inc.