Transmit-Delay - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

transmit-delay

Syntax
Release Information
Description
Options
Mode
1336
transmit-delay transmDelay
no transmit-delay
Command introduced before JunosE Release 7.1.0.
Sets the estimated time it takes to transmit a link-state update packet on the OSPF
remote-neighbor interface. The no version restores the default value.
transmDelay—Link-state transmit delay in seconds; a number in the range 0–3600;
default value is 1
Remote Neighbor Configuration
Copyright © 2010, Juniper Networks, Inc.