Sscc Address - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

sscc address

Syntax
Release Information
Description
Options
Mode
1222
sscc { primary | secondary | tertiary } address ipAddress [ port portNumber ]
no sscc { primary | secondary | tertiary } address [ ipAddress [ port portNumber ] ]
Command introduced before JunosE Release 7.1.0.
Configures the SRC client (formerly SSCC) with the IP addresses of the SRC servers and
the ports on which the servers listen for activity. The no version removes the specified
server (primary, secondary, or tertiary) from the list of SRC servers.
primary—Primary SRC server
secondary—Secondary SRC server
tertiary—Tertiary SRC server
ipAddress—IP address of an SRC server
portNumber—SRC server port number on which the server listens for activity; default
port is 3288
Global Configuration
Copyright © 2010, Juniper Networks, Inc.