Time-To-Live - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

time-to-live

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
time-to-live ttlValue
no time-to-live
Command introduced before JunosE Release 7.1.0.
Specifies a hop count by setting the value of the time-to-live field used by packets sent
to a RIP remote neighbor. The no version restores the default value.
ttlValue—Number in the range 1–16; default value is 16
Remote Neighbor Configuration
Chapter 8: T Commands
1313